I need a bit of info on copper coiled pipe, I'm about to run in new radiator pipes downstairs in my house, it's got raised wooden floors with about 12" to the concrete slab, it needs to be copper or rodent proof as I live in the woods and we have mice around! Can the rolls of copper coils be used for this job, do I need inserts to use compression fittings to stop it being crushed? ie the rad valves?
I'll be running them all back to 1 or 2 heating manifolds as I definitely don't want any joints below the floor as we're fitting solid wood flooring ( I've been TOLD it's GOT to be solid wood flooring....
)
I've got a week off work so want to crack on with this little job....
Any help and advice will be appreciated.
Rob
I'll be running them all back to 1 or 2 heating manifolds as I definitely don't want any joints below the floor as we're fitting solid wood flooring ( I've been TOLD it's GOT to be solid wood flooring....
I've got a week off work so want to crack on with this little job....
Any help and advice will be appreciated.
Rob