Robert Tyrrell
Gas Engineer
- Messages
- 701
I know there is an obvious reason for you to say this but why take a baffle out? I they're all clean then surely it can't be to do with that?
- Thread starter Robert Tyrrell
- Start date
- Replies 21
- Views 4K
- cold morning problem start
Discuss Cold morning start up problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 10,034
I find a lot of the Riello RDB burners have the plastic air adjustment door seized or/and the adjustment bolt thread slipping. I remove the top air cover and take a look at it while adjusting air. Lots of them I have to manually push them with a screwdriver while using Allen key on air screw.
I would think highly likely to be the problem.
I would think highly likely to be the problem.
- Status
Reply to Cold morning start up problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I'm looking for some advice on a frustrating problem I'm having with my old Eurostar 50-60s oil boiler please? Although it's old, most parts...
- Locked
Hello, I have a ferroli falcon 2 boiler (yes it is pretty old). A few days ago the hot water started going hot and cold when running.
Monitoring...
I have a 2 pump hot water tank (Flomax 180L fitted in '94) in airing cupboard system with an Ideal classic boiler (downstairs next to an external...
Hoping somebody can help, So, in a nutshell…
Standard 90s Westbury home – condensing boiler, pump, wall thermostat, etc etc... Normal, common or...
Hi there. I have Grant oil fired boiler which when cold, takes multiple times to fire up. It will run for say 20 or 30 seconds with hot exhaust...