- Messages
- 7,711
just a quick one which olive is most likely going to cause galvanic corrosion on carbon steel brass or copper ones???
- Thread starter hammers4spanner
- Start date
- Replies 2
- Views 872
- carbon carbon steel steel
Discuss carbon steel in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
G
glenno1
- Messages
- 7,711
handy table that
- Status
Reply to carbon steel in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi have surplus water feed and return pipes in my home. I can't isolate them so will need to freeze. House built 1970's. They're as far as can...
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it...
I have a hot water cylinder which has low carbon steel pipework to it - I have tried to add some pictures
I need to replace the cylinder because...
Hello,
I'm installing my first Belfast/butler kitchen sink. It came with the waste and stainless steel drain. To my surprise the kit only has one...
Hi Guys,
I am looking to replace radiator as the old threaded valve is shot on this old building but it is attached to what looks like 1 inch...
