Search the forum,

Discuss Boiler Plus - Smart Controls & OpenTherm in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Jerry

Gas Engineer
Messages
328
Good evening All,

I have come accross a situation and I would like some opinions.

I am installling a combi boiler in a property with.......no internet!

My usual MO has been to fit a combi and Nest combo to keep homeowners and the law happy. Specifically Ideal Vogue Max Combi using the OpenTherm on the Nest.

What would you do where there is no internet?

My plan is to fit a weather compensator and a (Honeywell) wireless programable room stat. Probably the CM927 or TR4.

Anyone else got a better, easier, smarter way? The homeowners are elderly and need simple controls.

Thanks in advance.

J
 

Reply to Boiler Plus - Smart Controls & OpenTherm in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
Hi everyone, Just wanted to share my experience with "upgrading" an S plan setup to Opentherm and Vaillant Control Center (VR66). There are a few threads on a few different forums but I wanted to share a full write-up with all the steps needed, benefits and costs. Overall, I fully recommend...
Replies
1
Views
1K
Hi all Had my old baxi 105 replaced with a baxi 630. Got the ifos fitted and set to curve 40. So far all ok. My controls are a salus iT500. Now I realise this is not opentherm compatable, so is worth upgrading to an opentherm smart thermostat to work along side the weather compensation ?? I...
Replies
4
Views
1K
Hello all, I'm looking for suggestions on heating controls. We'll be upgrading our boiler (To a modulating oil system boiler - EOGB Sapphire) and unvented cylinder (To a Mixergy cylinder) as we currently have a 13 year old fixed output combi boiler with a unvented cylinder which is fed solely...
Replies
0
Views
1K
Hello everyone, I am new to the forum, thanks for having me. Tomorrow I am getting an ATAG i28C installed but, unfortunately, the gas engineer that will fit it is not an ATAG partner. Therefore, I spent the weekend trying to understand a bit more about what options I would have to control the...
Replies
6
Views
2K
Hi All Looking at having controls replaced / upgraded for a Vaillant Ecotect plus combi boiler. Currently have x2 zone valves on the heating (x1 for rads via a Honeywell wireless stat, and x1 for UFH circuits via Heatmiser stats - both wired to a Heatmiser wiring centre) I'm interested in...
Replies
0
Views
890
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock