C
Carbretta
Hey all,
I have recently moving my washing machine into the utility room next door to make way for my new dishwasher. I have already cored a hole in the wall which is near the botom of the wall and have run the cold water inlet hose through it with no problems. I have 2 waste flexi hoses connected together to reach the distance and have to choices for this. 1 - I can pin the hose up straight out the washing machine to a height approx 8" above the height of the sink trap, then run it back to the floor, through the hole, about 2.5 meters along to the sink then back up to the trap, or still pin it up straight out the machine then core a hole higher up so there is not so much up and down distance for the water to travel.
Basically if I pin it up at a height 8" higher than the trap by the washing machine, does it matter if the pipe then drops down and back up again? I assume not as long as at no point it goes higher than the initial point I pin it up?
Any help appreciated
I have recently moving my washing machine into the utility room next door to make way for my new dishwasher. I have already cored a hole in the wall which is near the botom of the wall and have run the cold water inlet hose through it with no problems. I have 2 waste flexi hoses connected together to reach the distance and have to choices for this. 1 - I can pin the hose up straight out the washing machine to a height approx 8" above the height of the sink trap, then run it back to the floor, through the hole, about 2.5 meters along to the sink then back up to the trap, or still pin it up straight out the machine then core a hole higher up so there is not so much up and down distance for the water to travel.
Basically if I pin it up at a height 8" higher than the trap by the washing machine, does it matter if the pipe then drops down and back up again? I assume not as long as at no point it goes higher than the initial point I pin it up?
Any help appreciated