Search the forum,

Discuss baxi solo pump over run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

carrpaul

Gas Engineer
Messages
97
hi there can the baxi solo be wired to let the pump over run . i think i got told a while ago there was a kit available
 
I thought the pump over run was to take excessive heat away from the boiler after shut down?
 
Are you talking about the HE Solo or PF 2/3..If the HE has a lot of carp in the bottom of the heat ex then when it shuts down the residual heat can sometimes give O/H lock-out. 240340 is the number of pump over - run kit.
 
Are you talking about the HE Solo or PF 2/3..If the HE has a lot of carp in the bottom of the heat ex then when it shuts down the residual heat can sometimes give O/H lock-out. 240340 is the number of pump over - run kit.
good point poxi,both called solo but different boilers 1 works 1 dont
 
hi there just that am putting towle rail on to primary pipework , thought i could just use the facility , but looking in boiler book no over run for my system
 
hi there dose any one know how to wire pump overrun on baxi solo 12 he as boiler only has switch live ??
 
thanks for reply , so how dose p l on boiler do any thing different to connecting to orange
its too late for me to guess TBH,and even though baxi make the best combis i dont fit there heat only as there tat ,but pm a member on here called poxi,he works for them and as long as you ask nicely should be able to help
 
Status
Not open for further replies.

Reply to baxi solo pump over run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
246
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
246
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
500
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
373
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
263
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock