Search the forum,

Discuss Balancing heating question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

Adam80

I am thinking of balancing my heating system. On my landing there is a room stat with a radiator opposite. Does this radiator need balancing too or should the valves be fully open?
 
Stat opposite a rad. Thats great for your gas bill but carp at trying to warm the house , unless its turned right up .
 
i presume its not got any trv on it?

i would turn that one off first and open the one furthest from boiler up fully open then work your way back to the boiler. opening each l/s one turn on, then finally the hall rad 1/2 turn on.
should heat whole place before stat is satisfied.
 
Hi Adam, sorry to be a Doris but unless you are confident in replacing a leaking radiator valve I would not recomend touch them. See about one in five lockshield valves leak soon as you turn it.
 
There is a thread in the sticky section of this sub forum called "Croppies balancing thread"
You may think it concerns a perverted old man performing circus tricks, but you'd be wrong
It's quite iformative
 
Status
Not open for further replies.

Reply to Balancing heating question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
191
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
151
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
473
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
179
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock