Discuss Advice on waste connection for bowl sink in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
6
Hi,

I need some advice connecting my bowl sink to the waste. There was a Insinkerator installed that I have replaced with basket strainer waste (Viva PP0011).

I need to connect the waste but I find myself going around in circles in regards to selecting the correct parts.

Thanks

FrankW

You don't have permission to view attachments. Attachments are hidden.
 

Attachments

    You don't have permission to view attachments. Attachments are hidden.
I need a picture of the whole lot. Both sides.
The other side.. something to note is I am planning to install a dishwasher so I will need to add an additional appliance waste connector.

You don't have permission to view attachments. Attachments are hidden.

You don't have permission to view attachments. Attachments are hidden.
 

Attachments

    You don't have permission to view attachments. Attachments are hidden.
Could do with a photo of both from the front to gauge distance apart but I would expect you need one of these.

Could I have a measurement between the 2 basket strainers

 
Mcalpine asc10 and see what fittings you need might just need a elbow
 
Distance between baskets is 235mm (center to center).
You don't have permission to view attachments. Attachments are hidden.
 

Attachments

    You don't have permission to view attachments. Attachments are hidden.
 
Don’t forget to cap the unused washing machine points with the blue caps if you haven’t already
 

Reply to Advice on waste connection for bowl sink in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

New Threads

Some Stats

Threads
98,759
Messages
1,073,045
Members
25,557
Latest member
Kaus85
Back
Top