Search the forum,

Discuss Advice on fixing a urinal in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Jennie

Gas Engineer
Messages
283
Hi all

I'm a female plumber, so don't much encounter a urinal (especially as I usually only do domestic work).

I've been sent pics of something that has broken in a urinal - it's the flush valve. As I gather, the urinal cistern fills up gradually, and flushes through every so often.

A link to the correct new part to buy and fit would be massively appreciated.

Thanks everyone,

Jennie
 

Attachments

  • IMG-20210723-WA0002.jpg
    IMG-20210723-WA0002.jpg
    191.9 KB · Views: 21
  • IMG-20210723-WA0003.jpg
    IMG-20210723-WA0003.jpg
    109.9 KB · Views: 19
https://www.NoLinkingToThis/p/thomas-dudley-ltd-bbs-automatic-urinal-siphon-6-82mm/8559r
1/2 inch is the most common. Measure the height
Bear in mind if you fix it they'll call you when it's blocked and whether you're male of female it'll make your eyes water.
 
Also take an 11/2 - 22mm female iron
 
Just need to know the height of it and normally order
 

Reply to Advice on fixing a urinal in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
187
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
232
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock