Discuss Vokera sabre 29he got water fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Piperdave22

Gas Engineer
Messages
61
hello!
Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot .

Initial thoughts are a blocked heatplate but it looks like I have to take everything apart just to take it off and check it!
Has anyone taken one of these of and know how long it will take? And whether the boiler has to be dismantled?
Also suspecting divertor valve or water turbine can anyone point me in the right direction?

Central heating is working fine with no probs
 
Morning. Think some of us did mention about them being gas safe and waiting for the badge and post to be moved.;)
 
This is the gsr section
 
hello!
Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot .

Initial thoughts are a blocked heatplate but it looks like I have to take everything apart just to take it off and check it!
Has anyone taken one of these of and know how long it will take? And whether the boiler has to be dismantled?
Also suspecting divertor valve or water turbine can anyone point me in the right direction?

Central heating is working fine with no probs
Have not had this problem before mate. But will have a look at my bible when I get in. Leave it with me.
 
hello!
Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot .

Initial thoughts are a blocked heatplate but it looks like I have to take everything apart just to take it off and check it!
Has anyone taken one of these of and know how long it will take? And whether the boiler has to be dismantled?
Also suspecting divertor valve or water turbine can anyone point me in the right direction?

Central heating is working fine with no probs
At home now mate. How old is the boiler?
 
Is it definitely not doing it on heating as well? Just because the rads get hot I would not take that as a sign it is not doing it?
 
Plates are susceptible to blockages on a dirty system.
You can remove them without removing owt else although fiddly and also I'd be tempted to change the thermistor at the same time. Easy way to check is run hot water and at the time it shuts down, turn the cold supply lever off underneath and if the temp shoots up to the 90deg limit, then likely to be blocked plate.
 
Status
Not open for further replies.

Reply to Vokera sabre 29he got water fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Locked
Hello, I have a ferroli falcon 2 boiler (yes it is pretty old). A few days ago the hot water started going hot and cold when running. Monitoring...
Replies
3
Views
357
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
348
I have an old Potterton suprima boiler with a hot water tank and pump. We have hot water but no heating, the light on the boiler is showing amber...
Replies
14
Views
2K
Ferroli 32c he (combi) So after having a 2 week holiday, we have come home to no hot water. It just cycles on off every second. Heating working...
Replies
5
Views
584
Got up on Wednesday morning no hot water, (only cold water coming out of hot tap). Checked boiler, it had zero pressure and F1 fault showing. So I...
Replies
16
Views
1K
Back
Top