Discuss Toilet syphon replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net
The turbo 88 only seems to be available in 7.5-9.5". Tha current syphon measures 11" from top to bottom. Is this likely to work.
The 9.5 adjustable goes from 191-241mm. 275mm is 11". That link says the max it adjusts to is 241mm which I think is 9.5" not litres.look at the adjustable one
Syphon, dual flush syphon, toilet siphon - Dudley Turbo 88.
9.5L is 11 " from the bottom to the top/ overflow part
The 9.5 adjustable goes from 191-241mm. 275mm is 11". That link says the max it adjusts to is 241mm which I think is 9.5" not litres.
In my experience of where I had to fit a lower Syphon, I find the normal water level is still achievable about the same. The 11" high syphons were well above the water line.
In fact, the lower syphon will begin to flush quicker and much easier when handle is pushed down because it now only requires a shorter lift of water inside the lower syphon to start the flush
The 9.5 adjustable goes from 191-241mm. 275mm is 11". That link says the max it adjusts to is 241mm which I think is 9.5" not litres.
I've just measured a 9" as 10.3/4" maximum height including washer on the bottom to where the screw goes in.
From Dudleys website, bottom of page; Syphon, dual flush syphon, toilet siphon - Dudley Turbo 88.
254mm 10" part no.313879
That'll be 11.3/4" in real terms.
Reply to Toilet syphon replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.