- Messages
- 34,368
- Solutions
- 2
Don't have one
Got a dial gauge eg pressure and an anton 140
Got a dial gauge eg pressure and an anton 140
Discuss Pressure testing 63mm gas pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 5,172
I wonder what pressure my kane455 goes upto
- Messages
- 6,131
Think mine is 75mb
- Messages
- 34,368
- Solutions
- 2
Bes do a 100 mbar gauge
- Messages
- 5,172
Thank you sir. That is who I ordered my 63mm fittings from last night and they were supposed to get here before 10.30 today. They just arrived now
- Messages
- 4,294
Ive not read all the post but the below will have a connector to suit
Leak Testing fittings
Leak Testing fittings
- Messages
- 5,172
Interesting tools. Don't think I could find one for the diameter of pipe though
- Messages
- 34,368
- Solutions
- 2
Waste test plug depending on internal bore
- Messages
- 5,172
Not cheap hey at £47
- Messages
- 4,294
Reply to Pressure testing 63mm gas pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...