Zip inline es3

[leiadad]

Has anyone fitted zip inline es3 before, reason I ask is I spoke to technical today and they told me it can't be used with thermostatic taps as can affect pcb and I can't figure out why

 

[ShaunCorbs]

Not much hot getting drawn through the tap

Separate taps only

 

[leiadad]

I see what you are saying thanks shaUn, could the same be said for a mixer

 

[Old Account]

I see what you are saying thanks shaUn, could the same be said for a mixer

Hi lei,

Check here the instructions before proceeding...

[video]http://www.spatec.co.uk/files/Download/zipinlines.pdf[/video]

Scroll down to the cautions there you will find some do's and don'ts ...

Mixer should be fine otherwise it would be stated in the instructions.

Kind regards

Ron

 

[Old Account]

I see what you are saying thanks shaUn, could the same be said for a mixer

Hi lei,

Check here the instructions before proceeding...

[video]http://www.spatec.co.uk/files/Download/zipinlines.pdf[/video]

Scroll down to the cautions there you will find some do's and don'ts ...

Mixer should be fine otherwise it would be stated in the instructions.

Kind regards

Ron

 

[leiadad]

Yeah thanks matchless, I have seen it I have also spoke to technical. I just couldn't understand why mixer is ok for pcb but thermostatic is not