Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Worcester junior 28i in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

derrybongo

Hi Guys

worcester bosch junior 28i : boiler doesnt fire up when heating is called for but if you switch on the hot water tap the boiler fires and when you switch the tap off the boiler stays on and the radiators heat up all ok
the customer said he can hear clicking when its calling for heat from the boiler but it doesnt light until you switch the tap on

any ideas on this
 
these have an electronic diverter, only a small paddle, a simple strip down would tell u if its sticking or not
 
i had one of these before with the stepper motor which i pulled out and tested ,put it back and all working fine this has happened twice now on different jobs with no call back ,according to bosch the boiler forgets which mode its in ,sounds like rubbish to me but there you go
 
Hi
the customer says he hears the boiler trying to ignite when the heating is called for so i thought it would be getting the signal from the divertor v/v micro switch for the ignition.
 
Status
Not open for further replies.

Reply to Worcester junior 28i in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
287
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from...
Replies
0
Views
99
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock