From the United States of America? - Checkout our specific plumbing forum for you:USA Plumbing Forum

Discuss Ufh in timber ground floor in the Water Underfloor Heating Installations area at PlumbersForums.net

Hi all
I'm building a single story rear extension and would like to use UFH

It's going to be a timber joist for with 22mm chipboard flooring running from a combination boiler
What is the most effective way of installing the UFH?
1) spreader plates.
2) celotex between joist with a biscuit mix
3 or something else?
Thanks Russ
 

ShaunCorbs

Staff member
S. Mod
Plumber
Gas Engineer
Infil with insulation then cut your chip board to infill between the joists so your not raising your height then over lay ufh system

Find it’s the best of both worlds
 
Plumbase - Plumbers Forum Sponsor
This official sponsor may provide discounts for members

townfanjon

Esteemed
Plumber
Gas Engineer
Advent Win
But I have only see talks of the biscuit mix in a first floor but I'm wanting to do it on the ground floor ?
Yep fine pal . I was going to do the full house( bungalow) with that system but was too much upheaval but just doing the bathroom now
 

Reply to Ufh in timber ground floor in the Water Underfloor Heating Installations area at PlumbersForums.net. Plumbing questions, answers, tips and tricks.

Wetroom Store - Official Forum Sponsor
This official sponsor may provide discounts for members

Plumbing and Plumbers

Plumbing Workwear

Shower Power Booster

Plumbase Spares - Plumbing Supplies and Spare Parts

Water Underfloor Heating

CORGI Direct for Plumbers

The Wetroom Store

Plumbase Spares

New Posts Threads Members

Top