Discuss Testing for hard water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
No mate, need a separate meter for that.

Sent from my Desire HD using Tapatalk
 
be wary of what united utilities will tell you!

i've contacted them in the past about this (regarding what treatment i need for perfect beer brewing water)

they will give you a analytical breakdown of what is in the water. this will be accurate and is the only part of the report you should trust but only after it has been confirmed that it is postcode specific and not a geographical average that covers something like a quarter of the country.
if like me you live in the NW they also state that we are a soft water area. *******s to that. any local plumber will tell you, in fact any fool with a kettle and a bit of common sense will tell you that we are temp hard!

KJ
 
yep I thought we can't be all soft water as we do get some limescale and some people think they must have very hard water! I wonder how accurate they are for the area of a small town that we mostly work in. I'll speak to them and get a tds meter. May get fernox or kamco or one from WATER TESTING INSTRUMENTS - HM Digital
 
yep I thought we can't be all soft water as we do get some limescale and some people think they must have very hard water! I wonder how accurate they are for the area of a small town that we mostly work in. I'll speak to them and get a tds meter. May get fernox or kamco or one from WATER TESTING INSTRUMENTS - HM Digital

i have the hm tds and ph meters.....vey good.
 
got my tds meter of ebay for about ÂŁ30 including postage from usa. alot cheaper then it costs to buy from the uk. I always record the ppm on the benchmark now, shows any manufactures engineer you have checked and not invalidated there warranty as they all expect you to protect the boiler if you have a reading above 200ppm.
 
cheers sounds good, will get one and do the same, adds to your credibility too. Still not sure which to get but will look into it
 
Status
Not open for further replies.

Reply to Testing for hard water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
146
Hi everyone, Gas combi Boiler Mains fed in all taps and shower How do I balance the water pressure in all faucets in my flat. Every tap/water...
Replies
2
Views
516
Hi, I am a homeowner but caught between a rock & a hard place. I am trying to get a Vaillant ecoTEC 630 plus serviced but the gas safe engineer &...
Replies
8
Views
1K
Hi, Just checking I'm not talking rot. Today I visited a house with a Baxi 228 combi boiler. The technical spec for the DHW output is shown in...
Replies
6
Views
1K
Some advice please about a really worrying problem. I live in a terraced 2 bed room house. 10 days ago the gas combi boiler stopped heating the...
Replies
3
Views
536
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock