Search the forum,

Discuss Tempering Valve - Best Brands in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

D

daylightsaver

So my hot water tank is barely 3 years old and a recent service check tells me the tempering valve is on the way out

It's a Hydroboss brand from Tradelink and I'm keen not to replace crap with crap

So what are the best brands of valves on the market ? The plumber recommended AVG
 
AVG are fairly good, but they all have their issues.
Hydroboss weren't a bad unit - they all have to pass Australian Standards Testing, which would be fairly strict regarding Tempering Valves.

What was the reasoning behind diagnosing the valve faulty?
Somewhere, it is stated, they should be replaced every 5 years, but no one does unless they cause problems.

Do you have fluctuating water temperatures or water not hot enough - below 50C?

If not, I wouldn't change it.

They do have filters which can block and cause issues and non-return valves that can fault.
They are not overly expensive - what were you quoted on replacement?
 

Reply to Tempering Valve - Best Brands in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
186
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
203
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
122
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock