Taps and Showers

[spanner]

Yeah that's quite reasonable priced, what drill did u use for the basin????

Wet core drill. And quite expensive. I'll post up a picture later on. But goes through the lot. Came in a set of 5 bits 16mm 25mm 32mm 44mm and 52mm

 

[spanner]

£50 is that it?

Yep. Bullseye £50

 

[village idiot]

spanner, I applaud you. If I had turned up there and they appeared 20mins later, I wouldn't even still be there. C'mon, did they pay you for attending? If not, why wait? On a plus side, they will be able to recommend you now to all their ''friends''. So more work will be coming your way

 

[Phil]

Two lovely old 1960's Supa taps replaced with a nasty Chinese made basin mixer from Amazon which will last at best 5 years.

What are you doing with the Taps Spanner?

 

[spanner]

spanner, I applaud you. If I had turned up there and they appeared 20mins later, I wouldn't even still be there. C'mon, did they pay you for attending? If not, why wait? On a plus side, they will be able to recommend you now to all their ''friends''. So more work will be coming your way

Fingers and toes crossed
But comings from there I'll prepare 30 earlier sos I'll be there 30 mins later

 

[spanner]

Two lovely old 1960's Supa taps replaced with a nasty Chinese made basin mixer from Amazon which will last at best 5 years.

What are you doing with the Taps Spanner?

Keeping them mate. They're not going with the scrap bag
Traditional good old style.
save for rainy day

 

[Phil]

I like your style re the drilling, sometimes you have to make things fit by whatever means.

 

[spanner]

+1 i would want more than that to do the bath taps not much space

Abso no space
I was curdling the bog

 

[spanner]

I like your style re the drilling, sometimes you have to make things fit by whatever means.

Easy.
Drilled Base 32mm wet core drill
Sprayed with water
Left the perfect size hole.

 

[village idiot]

Easy.
Drilled Base 32mm wet core drill
Sprayed with water
Left the perfect size hole.

Nicely done. BTW, when you have to use ''Specialist Tools'' to do a job, you really need to charge extra as you have to factor in the replacement cost of the specialist tool. Thecost to be spread over how many jobs you believe you will use the tool for.