Search the forum,

Discuss Stuart turner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

wattsie1987

Plumbers Arms member
Plumber
Gas Engineer
Messages
379
I always fit monsoons as there the dogs balls. Has anyone ever had a showermate cut out tho? As far as I'm aware the monsoon is continuously rated and the showermate not and I'm guessing will cut out due to heat or a timer? Only asking as a mate needs one and doesn't want to fork out fork out for a monsoon.
 
Answered your own question there wattsie lol....pretty good website and tech helpline just researched a replacement for an old techflow model which I have to change for the Wifes friend over the holidays .....regards Turnpin:smile5:
 
Answered your own question there wattsie lol....pretty good website and tech helpline just researched a replacement for an old techflow model which I have to change for the Wifes friend over the holidays .....regards Turnpin:smile5:

Yea brilliant company mate have used them a lot for mains cold and pumped hot off of vented cylinders fitted in basements. The rep for my area is clued up to.
 
Yea brilliant company mate have used them a lot for mains cold and pumped hot off of vented cylinders fitted in basements. The rep for my area is clued up to.

Agree with the comments regarding how good and helpful they are which is why I will be talking to them soon re their macerator range as I especially like one aspect of the design.
 
The design of the tank. Won`t be suitable for all replacement jobs, will mainly suit new installs but shows that their not afraid to break the mould which I like.
 
Status
Not open for further replies.

Reply to Stuart turner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock