Search the forum,

Discuss Some stats to record - see how the forum is doing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Dan

Administrator
Staff member
Admin
Messages
2,782
Alright, I thought I'd stick some stats up here so we can see how the forum does over time. It's not a score to beat or anything. The forum does what it does. But it's a good guide as to what works etc when we change things over time.

All these are viewable on the homepage.

Threads 89,031
Messages 1,009,438
Members 12,939
Threads last 24 hours 17
Messages last 24 hours 129
Members last 30 days 1,598


So the last 3 are the ones that will move around a lot. And were really low a couple of days ago.
The members last 30 days is members who logged in within the last 30 days, not joined the forum.

So considering we have 13,000, that's about right. About 10 usually, but I've sent a mass PM out so that always makes it increase a lot. So we'll wait for that to calm down and see if it's still around 10%.

The messages were about that last week, but it was the same 15 members posting them. Now we have pulled back a little, more newbies are posting it seems. And that's what helps get questions on the forum, and stuff for regulars to answer. So that's fairly good too right now.

We have some void with around 4000 members in somewhere. When I run tools to update members in the backend, we have 17,500 ish right now. Yet the forum is only recognising around 13,000. Not sure why I'm looking into it.

I've erased accounts that haven't been logged into within 2 years. So that figure is fairly active members. I wanted to give people a chance to find out about our firming up the rules and see if some come back on.

Around 45 people have erased their accounts. Reasons ranging from 'You're a dick' lmao to 'I'm american and your sizes are different' which is a fair point.

So I've made a USA forum and Australian forum. They're at the very bottom of the forum homepage. If we can clock threads made by US members and AUS members, and move them to there. We've found on sparks that we have USA members helping other USA members now. Have loads of them on there who are around 4-5 hours behind so we get an influx around 2am of them using the forum when no Brits are on there. Which is nice. Get some traffic at some other times.

Another stat is this one: Total: 294 users (per 24 hours)

That's got its own block on the forum sidebar on the homepage. The actual names are limited to 50. Else the block is huge and takes up all the sidebar. That 294 is due to the mass email, that will drop towards the end of this week to the real figures so I'll take another look Monday and that's going to be the natural amount of users who login over 24 hours. But I do like saving this bloated number too, as that's the amount per day that respond to a mass PM/Email. So that's a number I usually need also.

Big thanks to you all for helping out here, I can see you all clicking buttons and modding well. Thanks. :)

Once we have got the members used to the politeness that we want, we can relax again and let them have some freedom. It's only this next couple of weeks we really need to keep a close eye. And then we tend to find that they keep to the pack and don't stray off.

Keep it up. :)
 

Reply to Some stats to record - see how the forum is doing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
0
Views
29
B
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
112
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
240
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
127
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock