Discuss Skill saw needed, any suggestions in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
I need a skill saw
Never owned one before but used other people's
Any recommendations? Up to £100 ideally and not bothered if it's battery or mains powered
 
You wont go wrong with a "skill saw" by brand ( I assume you mean circular saw ) . had mine well over 15 years now .
 
Makita ds610z if you already on a makita cordless platform
Makita hs7601 cam gey 240v or 110
Makita dhs680z brushless cordless body only
Bosch gsk190
Cheap chearful evolution circular saw

On line howe tools or sometimes on special in amazon ps the makita 610z is body only no batt charger ot case
 
I use a battery Makita for a lot of smaller jobs but find that the Evolution unit is very good it will cut anything with one blade, + you can change blade for a stone cutter one very useful, have chased across concrete floors with it.
 
I use a battery Makita for a lot of smaller jobs but find that the Evolution unit is very good it will cut anything with one blade, + you can change blade for a stone cutter one very useful, have chased across concrete floors with it.
Is the evolution good for delicate cuts like kitchen end panels it is it a bit rough?
 
Is the evolution good for delicate cuts like kitchen end panels it is it a bit rough?

Its a very good blade will give a fine cut , But don't just buy the blade you need to get the saw unit its to do with the toque it delivers Best to look on there web site and I believe its made in the uk.
 
Battery powered saws will almost cut anything these days - but it depends on a sharp blade and what you are cutting.
If you want a powered saw, they do have a lot more grunt and will be much more forgiving with a not so sharp / blunt blade.
 
Status
Not open for further replies.

Reply to Skill saw needed, any suggestions in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
311
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
335
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
198
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
164
Sonya K
S
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
330
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock