Y
yamahamark
Im a bit messy with a trowel hence the cardboard, plus its its easier spending a little extra time doing something at home Where the time/money factor doesnt come into play.
Discuss sealing around flue in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to sealing around flue in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
We are from Alberta, and I own an electrical company.
I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Newest Plumbing Threads
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2