Discuss powermax 155x failed gas safe cert in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

acmgas

Gas Engineer
Messages
25
Hi all,

I am looking for some advise on a replacement combi boiler for the powermax 155x.
B/g have been out and and failed it due to spillage from the burner i believe.
It is in a internal cupboard 10mtr from an external wall.
I unsure at this moment if it can be moved to an external wall so have to quote for same position.
If someone could recommend the best combi boiler to exchange over to, In the same position Please

Thanks mark
 
viessmann 111/222

or combi boiler with cylinder
 
Hi Shaun,

If i could relocate the boiler to a out side wall,
would a 30kw combi be suitable for a replacement.
its only a two bed two bath apartment.

thanks mark
,
 
Hi Shaun,

If i could relocate the boiler to a out side wall,
would a 30kw combi be suitable for a replacement.
its only a two bed two bath apartment.

thanks mark
,

combi only good for any no of bed rooms and one bath (sometimes not even that)
 
Could a small kw system boiler be an option on an external wall running back to a small unvented cylinder in the position where the powermax is now situated?
 
Could a small kw system boiler be an option on an external wall running back to a small unvented cylinder in the position where the powermax is now situated?

yes but it would be the same as using a viessmann 222-f
 
checked the price off one out £2500 for the 222-f unit then the fluing and additional bits may be getting on for £3000 .

Never to sure what is the best to quote for these landlords,
the majority End up going for the cheapest quote no matter what the future problems may be.
 
checked the price off one out £2500 for the 222-f unit then the fluing and additional bits may be getting on for £3000 .

Never to sure what is the best to quote for these landlords,
the majority End up going for the cheapest quote no matter what the future problems may be.

if its for landlord a combi will go in but i would quote for either a 111 or 222
 
been looking for the max flue length for the 111-w but cant find .
would you know by any chance
 
Status
Not open for further replies.

Reply to powermax 155x failed gas safe cert in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
578
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
349
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
362
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock