Search the forum,

Discuss Plumber wanted for house improvement project in Mid Wales in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
I need a reliable plumber to carry out the following work:
Move and replace a hot water cylinder. The cylinder to be replaced with a mega flo or similar. Modify central heating fitting an solan system to control CH & hot water independently. Current system also has a back boiler.
This work is required so we can convert 1 bathroom to 2 rooms one with bath & toilet the other with shower & toilet.
Once the cylinder is moved we need support in adding the extra toilet and extending pipe work to the new layout of the bathroom fixtures.
We also plan to add a downstairs extension with toilet and sink.
We are looking for a plumber to support us in this work.
Additional information can be provided on request Please PM if interested.
 
Last edited:

Reply to Plumber wanted for house improvement project in Mid Wales in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock