Pipe de burring

[gastec]

80 grit emery cloth from Toolstation

 

[ShaunCorbs]

I only use blue monster emery mesh roll.
Blue Monster Premium Abrasive Cloths
And a step drill in a 10.8v drill for deburring. Although thinking of getting a battery dremel or die grinder for the task soeeds op deburring especially when I have run out of new pipe slice wheels.

Geberit Mapress Rohrentgrater Deburring Tool 0 5 1 1in OR 0 5 2 | eBay

or rems make the same one

 

[solutions]

Geberit Mapress Rohrentgrater Deburring Tool 0 5 1 1in OR 0 5 2 | eBay

or rems make the same one

I take it there good?

 

[ShaunCorbs]

I take it there good?

yea does internal and external double ended, the rems one you can fit on a drill if you get the right one, if you like your power tools

 

[dancinplumba]

yea does internal and external double ended, the rems one you can fit on a drill if you get the right one, if you like your power tools

Got the rems one, cost an arm an a leg

 

[ShaunCorbs]

Got the rems one, cost an arm an a leg

well share your thoughts, we might be able to get solutions to spend some of his millions on one

 

[dancinplumba]

It does its job, saves my wrist so worth it. Not tested it against other ones. Was/is it worth £150 ?
Don't press too hard tho, buggas the pipe haha

 

[dancinplumba]

REMS REG 10-42 - Outer-inner pipe deburrer
This one with drill adaptor

 

[ShaunCorbs]

REMS REG 10-42 - Outer-inner pipe deburrer
This one with drill adaptor

or this one

http://www.rems.de/kataloge/eng/sections/REMS-REG-10-54.pdf

 

[Roger Welton]

I have the rems one, though I probably wouldn't bother with the drill mountable one again though as its plenty good enough in handamatic.

The gerberit one linked above looks suspiciously similar.