Pipe de burring

[Eyespy999]

Hi,

Does anyone have any alternative for de burring and cleaning copper pipe before soldering? I am down to my last threads of wire wool and have looking for something else to use.

Regards

 

[ShaunCorbs]

rems or geberit pipe de burrer or monument tube cutters

 

[rpm]

Deburring tool from Toolstation amongst others.

 

[ShaunCorbs]

Deburring tool from Toolstation amongst others.

you must love it twice as much

 

[townfanjon]

Toolstation do a roll of emery cloth just spot on for cleaning , they last for years and are at least 100 miles long

 

[jaydebruyne]

I use a momument deburrer - Monument Tools Internal and External Deburrer | Deburring | NoLinkingToThis - and wire wool to clean.. I know some of the cutters have a deburrer that you can flip out the side but I use the rothenburger pipe slices.

 

[lame plumber]

dont go near wire wool anymore, just use the roll of emery everytime

 

[plumben]

Ive got the monument pipe de burring tools also, upto 42mm internal and external
And use emery cloth all the time, I've got a roll of wire wool for emergencys or if I'm cleaning paint off

 

[jaydebruyne]

Ive got the monument pipe de burring tools also, upto 42mm internal and external
And use emery cloth all the time, I've got a roll of wire wool for emergencys or if I'm cleaning paint off

Might have to try some emery.. Is it like a gauze?

 

[solutions]

I only use blue monster emery mesh roll.
http://cleanfit.com/blue_monster_abrasive_cloths_70151.shtml
And a step drill in a 10.8v drill for deburring. Although thinking of getting a battery dremel or die grinder for the task soeeds op deburring especially when I have run out of new pipe slice wheels.