Discuss makita sds in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I been using a similar 36v bosch cordless SDS and its great for getting clips on the wall etc but even on a full charge it wont go through a standard wall for a condense drain or similar, it either runs out of charge or overheats.

EDIT: oh hang on, just seen that its a 240v (link dont work, I read the text and saw the 24) - it will be fine, I use a similar hitachi up to 157 or whatever it is core drill
 
Last edited:
I been using a similar 36v bosch cordless SDS and its great for getting clips on the wall etc but even on a full charge it wont go through a standard wall for a condense drain or similar, it either runs out of charge or overheats.

EDIT: oh hang on, just seen that its a 240v (link dont work, I read the text and saw the 24) - it will be fine, I use a similar hitachi up to 157 or whatever it is core drill

Which one do you have as there's two versions one is s compact version and the other is the full size version

If you have the full size version (36v) your talking out your bum as I have one and it will do 28mm easy no pilot

even used it to core a 4 inch hole through brick
 
Which one do you have as there's two versions one is s compact version and the other is the full size version

If you have the full size version (36v) your talking out your bum as I have one and it will do 28mm easy no pilot

even used it to core a 4 inch hole through brick

well it wouldn't be unusual for me to talk out of my bum I suppose :D

all I do know is going through a brick/breeze wall wasn't possible, it ran out and I had to get the corded drill from the van.
no idea which model it is, it cost ÂŁ350
 
If this one then somethings wrong

image.png
 
hmm, i reckon its this one

..... cant post a URL so... from screwfix description: - Bosch GBH36V-LiCP 2.9kg 1.3Ah Li-Ion Cordless SDS Plus Drill 36V
 
That's the compact version jay think max it can drill is 16mm and 1.3 arnt going to last long
 
Status
Not open for further replies.

Reply to makita sds in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
151
    • Like
Hi I recently did some pipe insulating in my loft. The only two I didn't do were the vent pipes. Not sure if that is the right term for them...
Replies
2
Views
377
I have read a few threads including one by Debbie Stano that were similar to my issue but that thread stopped a while back without any resolution...
Replies
1
Views
989
    • Like
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Replies
8
Views
676
I had my tools all knicked out the van last week so been replacing everything, got all my tools but can't decide on a SDS. I use all Milwaukee...
Replies
32
Views
5K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock