Search the forum,

Discuss liberty gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
5
has anyone worked for liberty gas? how was/is it?
 
Got mates that work for them and reckon they are one of the worst ever , got offered work witht hem myself but rates were awful
 
Bit of free advice.....don't go there unless it's a last resort. Treat their field staff like excrement unless you work in the office. Loads of people out for themselves loads of backstabbers and quite a few who are winging it. The operations manager of the gas is a painter and decorator ffs!!! And watch what you say to people most are related to someone, somewhere in the company. What are you going for service and breakdown or installs? Plus you'll pay for the slightest bit of damage for anything and they'll beleive the tenant if they say you've damage something, so you'll be paying.
 
And to be honest carp tradesmen seem to get on great there, its the good tradesmen that seem to come off the worst.
 
Status
Not open for further replies.

Reply to liberty gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
108
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
441
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
250
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
112
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
651
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock