Search the forum,

Discuss Large Extension - Oil Boiler Advice + UFH in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
we are planing a large 11m x 11m 1.5 storey extension on the side of our house. We have no access to mains gas.

Our current setup is as follows: (installed in a new build 5 years ago)
4 Beds 3 Baths
worcester bosch combi boiler (located in car port/shed detached from house)
UFH downstairs - 5 zones
Rad’s upstairs - 8 in total

Extension:
2 beds 2 baths
110M2 of UFH (will require a new separate manifold from existing setup)
Wood burning stove

3-5 showers in use each morning during an hour slot.

Currently the combi boiler is inadequate for our needs. From the initial reading I’ve done people seem to be suggesting a system or regular boiler paired with a large unvented cylinder. (With possible solar panel paired to it).

I would welcome advice/suggestions on the above on what route is best to take.
 
The combi will be woeful.

What size is it. Could run the cylinder off of the combi.

Needs to be sized correctly, but may save needing a new boiler.
 

Reply to Large Extension - Oil Boiler Advice + UFH in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
473
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock