Search the forum,

Discuss Kludi kitchen tap cartridge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

leelister6

Esteemed
Plumber
Gas Engineer
Messages
967
Looking for a replacement cartridge for my kitchen tap. The manufacturer is Kludi but the tap is about 20 years old and only just started to leak from the top. The cartridge is marked with no. 208103. Any places that you chaps use that could help. A quick web search has produced no results.
And before you say "Get a new tap", I'm from Barnsley, we're like Scotsmen with all the generousity squeezed out!
Dimensions attached. Thanks

kludi tap 1.jpg
 
Apologies folks been somewhat busy. Glad to see you are sorted.

Yorkshireman. Trousers by Burtons, pockets by Chubb ;) You do right lad!

Mind you, paying that price they bloody mugged you - unless of course it's solid gold under that chrome!
 

Reply to Kludi kitchen tap cartridge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
301
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
231
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
64
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
243
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock