Search the forum,

How to check heating elements in Triton T30i hand wash using a Multimeter

Post new thread

Discuss How to check heating elements in Triton T30i hand wash using a Multimeter in the USA area at PlumbersForums.net

E

Eamonn

Messages
2
This is a Triton hand wash, T30i .
Can I check whether the Element is working (or broken) using a Multimeter?
I attach a photo of the 'Can and Element assembly' unit.
 

Attachments

  • Can and Element assembly.jpg
    44.9 KB · Views: 14
You could check for continuity, if there is none then its faulty

You could also check the resistance / ohms but you would need to know the resistance of the element from the manufacturers instructions
 

Reply to How to check heating elements in Triton T30i hand wash using a Multimeter in the USA area at PlumbersForums.net

Similar plumbing topics

SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
200
SnosRap75
SnosRap75
R
squeaky grohe bathroom tap 2 months old
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
7
Views
260
Raff
R
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
150
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
230
PSxxxxxx
P
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
311
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice
Tilers Forum
Tile News
Tile Forum
Tiling Tools for Beginners
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock