Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Help designing an offset soil pipe vent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
6
hello,
I am designing a soil pipe for a timber bungalow that I am building where the soil vent pipe needs to be offset on a gable wall away from the main soil pipe. I have put in a link to a drawing I have made with my idea. Your advice is welcomed

Dropbox - plumbing layout (1).pdf

Thanks
 
This might be a daft reply but, Two 45 deg bends and a piece between?
If it's the travel length you want to calculate, then you need the two centres times 1.414 less the legs. (for 45 deg).
I don't fully understand the problem so if I have not answered it, please let me know
 
Last edited:
that’s what I was thinking. Do I put the Y branch for the soil vent so that the toilet feeds into the Y or the vent pipe feeds into the Y. Can you have any horizontal sections in the air vent pipe?
 
that’s what I was thinking. Do I put the Y branch for the soil vent so that the toilet feeds into the Y or the vent pipe feeds into the Y. Can you have any horizontal sections in the air vent pipe?

It's just a vent isn't it?
As long as it goes past any opening into the building by 3 foot it's fine.

If I understand what you're asking and you mean a junction with the WC entering the branch and the vent off the top, yes.
 
It's just a vent isn't it?
As long as it goes past any opening into the building by 3 foot it's fine.

If I understand what you're asking and you mean a junction with the WC entering the branch and the vent off the top, yes.
Yes. I think the drawing shows it more clearly than I can explain it
 
Yes. I think the drawing shows it more clearly than I can explain it
I see what you mean. Just studied pic a bit closer.
Any other vents ?
Why take it around the house? is there a reason why it can't come up where the WC Soil exits the building ?
 
I see what you mean. Just studied pic a bit closer.
Any other vents ?
Why take it around the house? is there a reason why it can't come up where the WC Soil exits the building ?
No other vents planned. I wanted to keep the stack pipe out of view as that gable is out of sight. Also keeps pipe from going through the roof or round the roof with an offset
 
What does it say on the drawing in the corner?
Does it say pumping station?
Is it not main sewer?
 
Should be ok however check the MI`s or call them with the measurements.
 
Status
Not open for further replies.

Reply to Help designing an offset soil pipe vent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
313
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
296
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
550
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
440
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock