HALL of SHAME PHOTo`s

[Whyme]

This ones for my gas port folio. PPE overkill!!

your core drills crap..:smiley2:

 

[Dannypipe]

 

[tamz]

This ones for my gas port folio. PPE overkill!!

Fail

Never use a drill with arms above your head like that. If it jambs it will have your arm broke.

 

[tamz]

View attachment 12078View attachment 12079

Nice Danny. I bet the valve was there before the meter :smile:

 

[Keefy]

View attachment 12078View attachment 12079

Thought I was looking at American plumbing there at first.

What's that U piece on your gauge, I take it it's to prevent your hose kinking? Not that I have a use for my manometer atm but interested all the same.

 

[Howsie]

Thought I was looking at American plumbing there at first.

What's that U piece on your gauge, I take it it's to prevent your hose kinking? Not that I have a use for my manometer atm but interested all the same.

If it is, it's on the wrong side

 

[Keefy]

If it is, it's on the wrong side

I'm too tired to even contemplate what you're talking about but okay, if you say so lol.

 

[Dannypipe]

Nice Danny. I bet the valve was there before the meter :smile:

Yeah, I'd put money on it being there a good while longer than the meter!

Thought I was looking at American plumbing there at first.

What's that U piece on your gauge, I take it it's to prevent your hose kinking? Not that I have a use for my manometer atm but interested all the same.

That's just to go on the end of the gauge when it's not in use. To stop the liquid spilling out. Nothing fancy mate!

I think Howsie is pulling your leg! The hose isn't connected to the gauge you see!

 

[SafeGasInstall]

Fail

Never use a drill with arms above your head like that. If it jambs it will have your arm broke.

Unless you have a hilti one

 

[Sparkgap]

Wasn't this allowed back in the day though?

yes, especially with lead work: fold over the end and hammer flat! Have seen a number of places with copper pipe flattened and soldered, usually on water but occasionally on gas.