Discuss ferroli f 30b in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

fixter1

heating working fine hot water runs hot and cold it runs for about 3 mins or so then shuts down tap runs cold boiler fires back up after about 30 secs then will run for about 3 to 5 mins then so on but can somtimes run a bath ok
 
Think this needs to be posted on GSR forum
 
high limit stat on boiler inside casing stat fitted on right hand side onto flow pipe slide stat down pipe about i inch refit casing then test this must be done by reg installer as removing casing
 
Status
Not open for further replies.

Reply to ferroli f 30b in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Locked
Hello, I have a ferroli falcon 2 boiler (yes it is pretty old). A few days ago the hot water started going hot and cold when running. Monitoring...
Replies
3
Views
368
Hello, my HW is taking longer than expected to heat up and it's getting worse. I can go 10-40 degs after 1.5 hours of only heating HW, whereas I...
Replies
2
Views
416
Hi I've seen a previous thread that is closed now regarding this subject but the end result I could not see. Our Shower runs hot for 30 seconds...
Replies
10
Views
719
I have a 2 pump hot water tank (Flomax 180L fitted in '94) in airing cupboard system with an Ideal classic boiler (downstairs next to an external...
Replies
12
Views
809
Evening All, Been having on and off issues with a Greenstar CDI classic Combi were the hot water is not heating up but only intermittently. Some...
Replies
2
Views
532

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock