Search the forum,

Discuss Black bits that smear in hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
6
Hi guys,

We've got a combi boiler system that was last serviced 2 years ago. For the last year or so we've been getting black specks coming through in the hot water when we run the bath. We haven't noticed them in any cold water outlet or hot water in any sinks.

At first we thought the issue was due to dirty whirlpool pipes but we've since had a new shower and bath and the issue is still there.

The black specks smear like mascara on the side of the bath.

Last week I took the shower fitting off to fix a leak and I noticed that the inside of the pipe (all plastic) looked really orange and rusty.

Not sure if this is relevant but the boiler needs the pressure topping up quite regularly.

I'm planning on getting someone out to take a look but thought I'd sound out what possible causes could before hand in case there are any things I can eliminate.

Thanks in advance.
 
A engineer will be needed your boiler needs a service every year to pick up any small faults to clean and check its operation and safety , this is a easy repair but parts will be needed . Kop
 

Reply to Black bits that smear in hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I hope someone can help. I’m hoping this isn’t a permanent problem. We’ve converted a gravity vented hot water system, into an unvented indirect hot water system to improve pressure in the house. The previous cylinders are in the loft now they’re in the garage next to the boiler. We...
Replies
18
Views
1K
The Water Board have just replaced the main water supply to our property. We have a ground floor combi boiler. The central heating system for the whole house is working as normal. Hot water is working as normal on the ground floor. However, there is no hot water to the first floor bathroom. This...
Replies
9
Views
506
Hello, We hade a problem with our hot water not working in one of our bathroom's (all other outlets were working) Therefore we got the Thermostatic Shower Valve changed and everything was working again. However a few days later, both hot and cold no longer works for the bath and the hot...
Replies
0
Views
280
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air gap as I was having dripping from the pressure relief valve. Since then I've lost a lot of pressure from the hot water feed to my shower. The rest of...
Replies
8
Views
308
C
Hello there. I wonder whether anyone could suggest what may be the issue with the hot water in my bathroom. I have asked four different plumbers who have come to the house to do work and none of them had a clue. Basically, when I turn on the hot tap on the bath, black bits come out in the...
Replies
6
Views
1K
CharlieMcT
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock