Search the forum,

Baxi Ecoblue and Drayton Wiser install

Post new thread

Discuss Baxi Ecoblue and Drayton Wiser install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

V

vadiro

Messages
2
Hi,
Can someone help me please with my issue?
I have a Baxi Ecoblue +28 ERP boiler controlled by a mechanical wireless thermostat (which I really, really hate) and I would like to fit a Drayton Wiser one channel control system. The first issue I have is how to connect it. From what I know of the install instructions is that I have two options:
- To connect to the wall plate -which I don’t have.
- To connect via OpenTherm -which I don’t know if I have
Has anyone experience with this type of boiler?
Cheers,
 

Reply to Baxi Ecoblue and Drayton Wiser install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
220
mutley racers
M
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
274
oz-plumber
O
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
216
SimonG
SimonG
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
147
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Forum
Tilers Talk
Tiling Blog
Tile News
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock