Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Baxi 105e instant central heating barely warm in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Phil Moschitto

Hi i have a puzzling problem with the central heating system.Basically whats happening is as follows...with the heating selector switch set to maximum temperature on the boiler the heating kicks in,all the temperature neons light up one by one (which only takes about 10 seconds )burner shuts down...but every rad is barely warm.I have no room stat,thermostatics have been checked etc.Any help would be greatly appreciated.I am a gas engineer but in catering equipment
 
Status
Not open for further replies.

Reply to Baxi 105e instant central heating barely warm in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
267
PSxxxxxx
P
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
540
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock