Search the forum,

Discuss back to wall pan but... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
The waste outlet is 1ft away from the back wall. Is there any chance? I will build a box 150mm deep for the concealed cistern so need a toilet that has the pan connection quite far back. I believe I have managed to do it once by swan necking a flexi but not sure if it's just an imagination.

I am not wanting to dig out the floor to alter and connect on to the clay.

I am thinking there has to be someone on here that has had a go
 
Vitra s20, or s50 . They are 150mm from the end of the spiggot to the back of the pan
 
Mutley you get the question mark multikwicks by mcalpine that might help, fitted loads of that vitra 20's victoria plumb or even ebay,
 
A little bit too pricey that toilet pan. I was looking for around 120. Is the ? The swan neck then Kris?
 
Yeh mate, different terminology lol
 
Depends i spose on the base of the wc if they are solid below the spigot the swan hits the porcalin,
 
Not sure about names or makes but have fitted a few back to walls where the spigot has been well recessed into the pan which would give you loads of play,
 
Mutley, Where did you get a price for the s20 btw pan, I use a merchants about 15 minutes away from Hampton court, I would have thought they could do that for 120.
 
An S20 is 105mm from back of the pan to the spigot though
 
Mutley, Where did you get a price for the s20 btw pan, I use a merchants about 15 minutes away from Hampton court, I would have thought they could do that for 120.

Just on google. Which is your merchant and what toilet can you suggest with a nice recessed pan outlet?
 
Masons plumbing in chalkers corner, sheen. They sell a lot of vitra toilets.
 
Here you go £120 inc vat . With a seat
Vitra S20 Back To Wall WC Suite : ukBathrooms
image.jpgimage.jpg
 
Ok, I am back onto this job now. This is my plan below. I hope I have calculated it alright. As the old toilet was so close to the door, i believe i cam manage a 40mm saving. It doesn't see like much but it does make a difference

20140620_102121.jpgScreenshot_2014-06-20-10-09-45.png
 
Last edited:
Status
Not open for further replies.

Reply to back to wall pan but... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
268
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
374
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
500
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock