Search the forum,

Advice on slot in replacement for shower unit?

Post new thread

Discuss Advice on slot in replacement for shower unit? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

J

Jarrod

Hi all,

I currently have one of these shower heads fitted in my bathroom : Milan Rectangular Rainfall Shower Head + Water Blade | Victorian Plumbing UK - https://www.victorianplumbing.co.uk/milan-rectangular-rainfall-shower-head-water-blade?campaign=googlebase&gclid=Cj0KCQjw2qKmBhCfARIsAFy8buKjYjpPBqR24wQCTk3gCNmpqyVB5wWoy0vRUQ3nqKpp1M9WIACKehEaAtN1EALw_wcB&gclsrc=aw.ds


I need to replace it with a shower head/handheld shower combo. I really cannot afford to have all the tiles ripped down to do this , so ideally i’m looking for something that will fit on to the existing fittings behind this shower head, which are two 3/4” outlets, 50mm apart from one another. Does anybody have any advice for me?

Thanks for any help
 

Reply to Advice on slot in replacement for shower unit? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
231
Firefox
F
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
262
John.g
J
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
194
SimonG
SimonG
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
exedon2
exedon2
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock