Hi guys,
im after some info on the most common make of oilr boiler u all install. The majority of boilers ive imstalled are worcester, ive always thought grants and some firbirds are a pain in the a@@ to service, where as the worcesters are fairly straight forward. We fitted a couple if...
Hi guys
Really need some help...
We have a Warmflow 70/90 Oil Fired Combi Boiler. We're looking at putting a porch/conservatory on to the property, right where the flue exits the external wall.
I have a couple of solutions for the flue but I REALLLY need to know what the maximum horizontal...
Hi
We have a problem - the pipe carrying water out of the top of the boiler is leaking and Warmflow say is an obsolete part and no longer available. Does anyone know of a supplier for parts for this old 70/90 boiler?
Many thanks.
I was servicing a warmflow condensing utility boiler today . It must be in about 6 years as its dated sep 2009. Its right tight to the wall at the left hand side with no pipework at that side. Seems a little damp low down and u can feel it off the jacket. Isnt the drain down valve either. It is...
Can I swap a pump head on a warmflow green 70 Kanin-pal combi he for anything else apart from the manufacturers own.
I've just been quoted £179+vat from plumb centre and £139+vat from hwos.
I can't believe a pump head is over £100 that's a rip off!
Looking for help and advice please? A number of years ago in Northern Ireland when Phoenix Gas were starting off, they were offering a scheme in conjunction with Warmflow to convert Warmflow Oil Boilers to burn gas, by changing the oil burner for a gas burner connected to the gas mains.
at the...
Hi All
I'm going to replace my warmflow oil boiler for a grant vortex
The only thing is my system heats the hot water by gravity but the vortex has a pump fitted and only has one inlet and one outlet but the warmflow boiler has 2 returns and 2 oultets connected
(warmflow old oil boiler )For...
Hi was wondering if any of yous guys have any tips on removing stuck baffle plates in a 2004 warmflow 70/90. They are probably all stuck but havent got past the top plate. Its just a flat plate and doesnt look that damaged just very tight front and back it wont budge at all. Never saw 1 as...
Hi all, new member's 1st post.
On removing the boiler top for cleaning etc. I found a number of the baffles
damaged/burnt/rotted away?? The damaged portions have become brittle and
turned a strange blue in colour. Is this just ageing wear and tear or a sign of a
burner malfunction? Being a very...
I have a warm flow combined boiler and the pipe labeled domestic cold water is leaking where it goes into a metal square box. It also has a junction on it that goes to a silver connection that the hot water goes to and the other side runs into square box as well. There is water coming out at a...
Hi chaps,
Bit of a bugger today - warm flow Utility 150HE , situated in a garage with a balanced low level flue It has gone sooty so cleaned it up changed nozz etc etc but when doing the flue gas analysis , no matter how much I opened up the air intake I could not get enough air. `the only way...
Hi
I have a 12 year old Warmflow 70/90 oil combi boiler. It was working fine until I found a leak from the flow switch pipe coupling. I attempted to tighten this and proceeded to snap the coupling resulting in a cold shower for me. After turning off the water and cleaning up I established that I...
Oz647
Thread
boiler
fitted
help
help needed
needed
plumber
reply
switch
warmflow
stumped on this one i am,
I have a 2012 warmflow HE combi 90 i service, it is installed in a customers 3 bed bungalow.
The boiler has excessive oil usage 1600ltrs in 6 months.
It has also suffered in the last 2 years with a cracked flow switch, leaking fiber washers (mains pressure at 2 bar)...
what can I use to replace the immersion in this ? why cant a standard one be used? the stat has gone in it and a new one is £46. also http://warmflow.tpsrv.co.uk/media/13331027883683rev01.pdf page 18, the cylinder stat seems faulty. its a jg speedfit system with a zone for ufh, zone for the hot...
Hi everyone, I've recently noticed that sometimes when my heating and water heating modes are turned completely at the Drayton control panel and the indicator lights are off that the pump continues to run and the burner still cuts in..... sometimes it's fine and cuts off when switched off...
Hi all went to service above boiler today had a few problems with it most of which straight forward apart from the temp sensor. I could not remove it from the test point so had to put fga into end of flue. Has anyone come across this issue and how did you get the bloody thing out.
Hello can anyone advise please?
Warmflow boiler is not firing however continues to run as if it has fired up - it is not cutting out or needing reset
Many thanks
Hi
I have just bought a property and am looking at installing an external oil combi boiler and require advice.
I have a semi detached bungalow and will be looking to convert attic in the future. Space is tight and I would prefer not to have any tanks in the attic space to maximise space...
We have a warmflow boiler, since having the UFH installed, ( approx 36 sq mtrs in floor area ), we have noticed the pressure of the boiler dropping, but when it's topped up to about 1.5 bar and the heating system switched on it goes quite high and sometimes starts venting out the relief valve...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.