Search the forum,

no water

A combination of aqueducts, reservoirs, and tunnels supply fresh water to New York City. With three major water systems (Croton, Catskill, and Delaware) stretching up to 125 miles (201 km) away from the city, its water supply system is one of the most extensive municipal water systems in the world.
New York's water treatment process is simpler than most other American cities. This largely reflects how well protected its watersheds are. The city has sought to restrict development surrounding them. One of its largest watershed protection programs is the Land Acquisition Program, under which the New York City Department of Environmental Protection (DEP) has purchased or protected, through conservation easement, over 130,000 acres (53,000 ha) since 1997. With all the care given, the city's water supply system is partially exempted from filtration requirements by both the federal and the state government, saving more than "$10 billion to build a massive filtration plant, and at least another $100 million annually on its operation". Moreover, the special topography the waterways run on allows 95% of the system's water to be supplied by gravity. The percentage of pumped water does change when the water level in the reservoirs is out of the normal range.

View More On Wikipedia.org
  1. S

    bypassed water main

    basically my problem is, i have redirected a water main by removing the old pipe and stop tap and re connected in another downstairs bathroom, as there was a leak somewhere under a new extention on the old water main. after making the re connection in its new place, i switched the water back on...
  2. C

    Ideal Isar HE24 fault no power to operator panel.

    Firstly great site!! I am a 45 year old time served mechanical engineer, I am self employed as a plumber( bathrooms and kitchens)/plasterer/tiler( wet rooms )/welder/mechanic/etc. THIS IS MY FIRST POST, SO HERE GOES!! My parents boiler is an Ideal HE24, was fitted with a grant in 2007, been...
  3. M

    Possible Air Lock

    A couple of days ago I replaced the radiator in the bathroom. I drained the central heating system by isolating water to F/E tank, openind rad bleed valves and draining at lowest point in system. After installing new rad i closed drain valve and all bleed valves and switched supply back on to...
  4. K

    fitting an outside tap

    Can anyone advise me on fitting an outside tap, the problem is the close proximity to an outside gas meter. Is this against regs?
  5. F

    shower pump to bathrom

    would using a shower pump for a whole bathroom be ok .i fitted a bathroom and the hws is very bad. the pump is already there to be used on a shower. i just wanted to know if any one could help? i also think there is a parcial block on the cold feed maybe to the hws vessel. hope you can shed some...
  6. M

    you've heard it all before!!!! BUT???

    Hi guys, I have been reading through the posts and know you must be annoyed with all us new guys wanting advice on how to become Gas safe engineers. Am sorry to have to ask you, but i am just after a little advice. I have just started my NVQ 3. I am working with a Gas engineer and have been for...
  7. N

    Spooky things going on

    Evening all, Ok, I am sub-contracting for a firm of property developers. They have assigned me a project which is basically stripping this house back to the bare bones, rip out existing plumbing and add new plumbing as the project progresses. The property is a 2 bed and is sited on a plot...
  8. W

    Today's job (cowboy strikes again!)

    Customer called me out saying there is no water coming from either the cold tap on the bathroom basin, the cold shower or the cold bath tap. So I get on site, try and open the taps and just a dribble. I turn off the mains stopcock and crack openthe joint at the top of the basin cold service...
  9. P

    imi range cylinder

    carrying on my CH woes. Cylinder has black plastic removable cover marked imi range. Inside is small tank with ball cock. water is brown colour. This top tank is full but there is no water in main cylinder. how do I fill main cylinder ?
  10. B

    Firebird C20 70K Combi Boiler no DHW

    I have an old oil-fired Firebird C20 70K combi boiler, that provides CH and DHW to my house which has a single bathroom with sink, shower and bath. Lately the pressure and volume of the HW has been pretty risible...with literally just a dribble of water coming out - although the boiler fires up...
  11. S

    no hot water

    i have a worcester 35CDi, had it for 10 years Its a combi i have a 3 bed house, no water tank. right from the start i have intermitent hotwater in the kitchen sink, the boiler does not fire up sometimes when the hotwater tap is on and also when having a shower (i have a THERMOSTATIC control) the...
  12. R

    Am I too old for a career as a plumber?

    I am now 46, pushing 47, do you think I'd be wise to try and see my later years out doing something that will definitely pay more than I'm doing now, with the kudos of being a skilled worker. Looking at NVQ2 hopefully leading on to more.... this of course assumes I miss the proverbial bus...
  13. S

    Aqualisa shower pump help needed

    I have been given a aqualisa quartz pump shower and have plumbed in as instructed by my plumber the problem is when switched on the dial flashes red continuously but nothing else happens , no water comes out. Can anyone help me its driving me mad?
  14. T

    Parkray ***bria Inset Roomheater

    I'm having some trouble locating support for this heater. We were told when we bought the house that we could use the Parkray despite the fact that a boiler was still in situ. After having a chimney sweep out he told us we couldn't. I'm in the process of redecorating the front room so now...
  15. C

    Motorized valve

    Hi i think the motorized valve has gone! has anyone got any hints or tips of how to tell for sure, also how do i change a motorized valve on a central heating sytem an explanation or link to a vid would be great. Also how do i tell if just the motor is gone or the hole thing. I have done a...
  16. M

    need someone to answer a question

    have an open vented system, when the pump is on, and i go to bleed the highest radiator the system is sucking in air and no water is coming out. what can the problem be, many thanks mark
  17. J

    booster pump

    hi, was just wondering is a grundfos 1.5 shower booster pump suitable to pump all hot and cold services in a one story apt including washing machine and dishwasher
  18. P

    Cistern not refilling need help!

    Hi guys, another plumbing related problem for me I'm afraid which was probably caused when fixing the last one!!! :( Our button flush toilet has stopped refilling after flush. There is a small spray of water coming from what I think is the fill valve but the cistern remains empty. It flushes...
  19. P

    Quality Control

    Got stitched up by triton today After saying how good they are yesterday it had to happen Went to repair a Hans grohe intregrated power shower today with a new motor sent through by triton as they make them apparently,no unit isolation so had to isolate at tank in roof,as motor unit before unit...
  20. C

    No water coming from hot tap

    Hi Group, I have just fitted a new bathroom including changing the radiator to a towel rail. During this period the water has been turned on and off several times and the system drained. Now finished and everything is working except that no water (hot or cold) is coming out of the hot waters...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock