New heating controls and wiring

[jaydebruyne]

I just need confirmation I'm doing this right as per my drawing..

Not sure if this is clear enough.. but...

I've replaced an old mechanical timer and room stat and had to rewire as custard wanted them relocated.

I was trying to do this without a wiring centre and it kept blowing the fuse lol

So... this is for a potterton heat only boiler serving heating only. They have a separate multipoint for hw.

I need to link permanent live to 1 on the programmer?
3 from programmer goes to 1 on room stat.
3 from room stat goes to switched live on boiler.
All permanent live for boiler and programmer you get from switched spur?

I'm pretty sure this is right but would like opinions please...

Cheers

 

[ShaunCorbs]

Not a problem

 

[leesparkykent]

Cheers Lee. . You're a sparks?

Yes mate. glad you found where you went wrong.

 

[jaydebruyne]

It was as I thought. I didn't use a wiring centre in the end and got it all up and running in the end

 

[ShaunCorbs]

It was as I thought. I didn't use a wiring centre in the end and got it all up and running in the end

good to hear