Discuss Vokera Mynute 16e possible electrical faults in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

MUZ50

I am hoping someone could help with vokera mynute 16e, it's not working, no ignition or fan starting.


Thanks in advance.


Muz
 
Last edited by a moderator:
Well done on your fault finding pal , but the rules here say , no help on boilers unless you are gas safe regestered , sorry
 
I can understand the safety issues with gas and I do not intend to touch anything to do with gas. I am asking about electrics.

Vokera's repair service for example states that if the fault is to do with external electric faults then they will not fix it. I am a fairly competent electrician and I am trying to see if others had similar problems with electrics and if the pcb may need changing.

If this site is not for diyers please let me know and I will stop posting in this forum.

Thanks
 
I can understand the safety issues with gas and I do not intend to touch anything to do with gas. I am asking about electrics.

Vokera's repair service for example states that if the fault is to do with external electric faults then they will not fix it. I am a fairly competent electrician and I am trying to see if others had similar problems with electrics and if the pcb may need changing.

If this site is not for diyers please let me know and I will stop posting in this forum.

Thanks

sorry to say you need to be gas safe to take the cover off and seeing that you have tested inside (on the pcb) you have had to take a cover off

get a gas safe eng out before you do something
 
Want gas safety or boiler repair advice? :
Please supply your Gas Safe / Oftec / Hetas Number, DIYers, odd job people and have a go heroes need not apply, and remeber any fuel burning appliance can kill.

That says it all!!!!!! see u.
 
This plumbing forum will not provide advice to anybody with regards to boiler repairs or any other form of gas plumbing without you first providing us with your Gas Safe Registration number in a thread - for very obvious reasons. If you're not qualified to touch gas, you should stay well clear of trying to!
 
Status
Not open for further replies.

Reply to Vokera Mynute 16e possible electrical faults in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
324
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
287
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
339
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
317

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock