Search the forum,

Discuss Aqualisa processor problem in the USA area at PlumbersForums.net

Messages
6
Electrician has stood on my aqualisa shower processor box/pump unit and now the water does not get hot enough for a shower even though the indicator light stays on to say it has reached temp....any ideas ?
 
I think it would be difficult to prove ....he hasn't admitted he done the dastardly deed

OK - I assumed you had seen this happen .......... given the way your OP is worded.

The failure could be a complete coincidence:)

PS : Have you tried switching it off at the isolator for a few minutes?
 
OK - I assumed you had seen this happen . given the way your OP is worded.

The failure could be a complete coincidence:)

PS : Have you tried switching it off at the isolator for a few minutes?
I have read that the unit should be isolated for two to three hours to reset it but that was after a power failure....but I will give it a go
 

Reply to Aqualisa processor problem in the USA area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
235
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
256
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock