Discuss Worcester controls cover plate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
Is anyone fitting a Worcester boiler with worcester controls?
I need the blanking plate that gets removed to fit a on 25SI compact, cant seem to find it as a spare part.
I also broke the green clips (or the last person broke them and bodges it bac in place):mad:
 
green clips Worcester normally send out foc if still in warranty if not there around a fiver

but i will have a look for a plate
 
Who do you contact for the clips?
It has Worcester/drayton controls but she cant use it, wants something simple
 
Status
Not open for further replies.

Reply to Worcester controls cover plate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
300
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form...
Replies
4
Views
251
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
286
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
350
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
248
Back
Top