Urgent help needed - Biasi 24S inbuilt time clock removal

[Masood]

Hi All,

Got a broken clock on a Biasi 24S, and the landlord would prefer not to have it replaced, but would rather have a programmable room stat instead. If anyone knows these boilers and can advise whether it's possible to remove the inbuilt time clock from the boiler's circuit and replace with an external control, I'd be very grateful.

The tenant has three small kids and is whining incessantly about the lack of heat...

Thanks,
Masood

 

[buckley plumb]

Hi All,

Got a broken clock on a Biasi 24S, and the landlord would prefer not to have it replaced, but would rather have a programmable room stat instead. If anyone knows these boilers and can advise whether it's possible to remove the inbuilt time clock from the boiler's circuit and replace with an external control, I'd be very grateful.

The tenant has three small kids and is whining incessantly about the lack of heat...

Thanks,
Masood

yes mate its possible either leave the existing clock on constant and fit a programmable time clock to the room stat terminals .if the clock is totaly broken it can be bypassed and an external fitted . cant remember which wires off top of my head but call biasi and they will tell you.

 

[Masood]

yes mate its possible either leave the existing clock on constant and fit a programmable time clock to the room stat terminals .if the clock is totaly broken it can be bypassed and an external fitted . cant remember which wires off top of my head but call biasi and they will tell you.

Cheers for confirming it can be done - I had planned to call Biasi this morning but went out to quote a job and forgot to do it, and I'm due to fix this bloody thing tomorrow! (