Search the forum,

Discuss Unvented immersion stat playing up in the USA area at PlumbersForums.net

Messages
154
I’ve got a stelflow 250L with 2 immersions fed by a change over stat so when top is hot bottom starts heating.

anyway the bottom stat recently tripped so I reset it. All was well but today it’s playing up again. I can hear it click if I mess with the casing.

it’s a cotherm TSE. I’m going to get a new one are there any better ones on the market?
 
In a normal economy7 setup yes.

but mine are fed from a solar diverter. So I want to heat the top of the tank first, as depending on the amount of solar power I can capture during the day depends on if I get a full tank or half tank of hot water.

anyway are there any better options than just replacing with the same cotherm tse? What is this MFS technology?
 
I am not a lover of those stats , try a Thermtec stat , fits the same and is a straight forward swap

just googled that make and it seems they have been bought out by Heatrod, who seems to sell cotherm.

the cotherm has only lasted 6 years of summer only use, as only really operates when I have enough bright sun to heat the whole tank. So not great.
 
6 , you have done well , try unvented components , sorry dont know how to do links
Visited the site and there are stats from about 11 different manufacturers.

[automerge]1589570826[/automerge]
Strange thing is they all have the same pic of a unival stat, but have different prices.
 
Will it be ok for an unvented tank?

ive had a look at the therowatt site and there are a few versions, any better than another?
[automerge]1589664424[/automerge]
Can anyone confirm?

what’s the difference between RTS and RTS Plus?
 
Last edited:

Reply to Unvented immersion stat playing up in the USA area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
292
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
179
PSxxxxxx
P
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
211
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock