Discuss Solderless Just for copper in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I recently had to use crimp fittings on another site where no hot works were allowed at all - the crimp fittings were extortion the hire of the crimp fitting tool was also expensive, you can make all the pipework up and without crimping them, change as needed but once they have been crimped and if you have made a mistake theres no changing or altering without stripping it all out and thus the crimp fitting you have just used now becomes useless...
speaking from experience!
get a plumber in to solder your joints otherwise use compression or push fit.
Where did you get your kit from also what were the prices ?
Reply to Solderless Just for copper in the Plumbing Jobs | The Job-board area at PlumbersForums.net