Discuss Replacing Grohe wireless shower control unit in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Hello
I need to replace my Grohe Geotherm shower cubicle mounted control unit.
Its around 17 years old but replacements seem to be available
The main hot / cold water control unit is in the loft, I think its working ok
How do I get the replacement cubicle control to connect to the loft unit wirelessly ?
Also the small remote has stopped working, not too worried about that
TIA
If you search online for the manual of your particular model, you should find the info you need.
I don't know if I've got the correct Geotherm model in the example below:
I assume the 'base unit' is the bit in your loft!
Reply to Replacing Grohe wireless shower control unit in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
