Search the forum,

Discuss Probationary Inspection. in the Gas Engineers Forum area at PlumbersForums.net

Messages
2
Hi. just had my probationary inspection.
Most of the inspection went ok, apart from when the inspector asked me questions about gas fires and gas cookers. I have my ticket for boilers and the inspection for all that side went fine. The last time I did anything about fires and cookers was 5 years ago at collage and neither was part of my exams back then. On the GSR site it says ; 'The inspector will assess your technical knowledge through a question-based assessment. This is to gain an understanding of your underpinning knowledge of the competencies that you hold'. When I told him I didn't have a ticket for them he said you should know anyway. I have talked to 4 other engineers and none of them were asked about fires and cookers, only boilers. Should I have been quized on something I don't have a ticket for? All the boilers I've so far fitted for Boxt, Heatable and my own have all been fitted and running no problems. Anyway, another inspection is to be scheduled so I'm swotting up on what he wants but it just seemed a bit odd. Just wanted to know others thoughts.
 
A lot of Cadent/esp engineers don’t have their tickets, but as for knowing, imo, you’d need to know basic stuff so you can report issues, eg, flame picture on a purge and relight.
 

Reply to Probationary Inspection. in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
536
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
275
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was...
Replies
0
Views
231
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
178
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
312

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock